函数生成器的优化设计

本文介绍了一种优化的多变量函数产生器的设计思想,详尽论述了多变量函数快速插值算法、消除冗余断点搜索的思想以及搜索次数为１的断点搜索策略。实用表明,该产生器高效可行,比一般的多变量函数产生器减少计算量一半左右,有效地缩短了仿真问题的求解时间。     

传热对水边界层流动的影响

本文评述了壁面传热对水边界层流体流动及其阻力的影响,同时分析了加热减阻的应用及其影响因素。传热不仅对层流流动、层流向湍流的转捩以及湍流流动有明显的影响,而且对流动分离以及由分离引起的空化也有显著影响。以热脉冲加热的主动式加热方式既可用来产生和消除边界层的T-S波,也能用来控制边界层的分离。因此,热控制技术可望在控制边界层转捩和分离,减小流动阻力等方面得到应用。     

微波雷达目标信号模拟器及其应用

本文为在野战条件下检测雷达测距系统的性能提供一种新型微波目标信号模拟器,闸述其工作原理及功能。除在检测雷达测距系统性能上已得到实际应用外,还论述了可以进一步开发的应用项目,因为不受场地和气候条件的限制,从而获得较好的效能、效率和效益。     

CON/SLK due date assignment and scheduling on a single machine with two agents

We consider scheduling problems involving two agents (agents A and B), each having a set of jobs that compete for the use of a common machine to process their respective jobs. The due dates of the A‐jobs are decision variables, which are determined by using the common (CON) or slack (SLK) due date assignment methods. Each agent wants to minimize a certain performance criterion depending on the completion times of its jobs only. Under each due date assignment method, the criterion of agent A is always the same, namely an integrated criterion consisting of the due date assignment cost and the weighted number of tardy jobs. Several different criteria are considered for agent B, including the maxima of regular functions (associated with each job), the total (weighted) completion time, and the weighted number of tardy jobs. The overall objective is to minimize the performance criterion of agent A, while keeping the objective value of agent B no greater than a given limit. We analyze the computational complexity, and devise polynomial or pseudo‐polynomial dynamic programming algorithms for the considered problems. We also convert, if viable, any of the devised pseudopolynomial dynamic programming algorithms into a fully polynomial‐time approximation scheme. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 416–429, 2016     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

The investigation of NTO/HMX-based plastic-bonded explosives and its safety performance

3-nitro-1,2,4-triazol-5-one (NTO) is the main component of insensitive munitions (IM) formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based composite explosives were prepared and characterized.The study focuses on the effect of NTO on the performance of the formulations,especially the safety performance.The results revealed that the mechanical sensi-tivity of formulations was associated with NTO content,as well as the thermal conductivity,specific heat capacity and Arrhenius parameters.Then,the high amount of NTO using in formulation was proved to be helpful for NTO/HMX-based formulation to exhibit good thermal safety.Besides,by accelerating rate calorimeter (ARC) and a modified cook-offequipment,the pressure and pressure rise rate were proved as the important indicator for judging the thermal safety performance in confined spaces.Finally,the numerical simulation was used as a credible method for predicting the respond temperature of cook-off experiment.     

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process, a one month thermal aging test was carried out at 70 C with pre-strain of 0％, 3％, 6％ and 9％, respectively. The low-field 1H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages. The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging. The results showed that with the increase of aging time, the decay rate of transverse relaxation curve became faster, the transverse relaxation time decreased, the value of combined parameter qMrl increased, the proportion of crosslinking chain decreased, while the proportion of dangling chain increased. Moreover, the stress relaxation modulus increased, the crosslinking network structure of HTPB coating became denser and the degree of cross-linking increased. At the initial aging stage, the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent. With the increase of aging time, the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase. The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950, which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.     

激光大气数话同传系统的设计

给出了一套以激光作为信息传输的载体 ,单片机作为控制调度计算机 ,以 DSP作为高速语音压缩解压部件的激光大气数话同传系统设计。来自麦克风的语音信号经 A/ D转换后 ,由 DSP压缩成 2 .4kbps～ 9.6 kbps的串行数字信号 ,同时2 .4kbps～ 9.6 kbps的串行数字信号可由 DSP解压成 8k Hz13bit数字语音信号。经过压缩的语音数据和来自多串行口控制器的数据 ,通过单片机的协调 ,实现数据和语音信息在大气中的同时传输     

大中型集贸市场防火

本文结合大、中型集贸市场的特点,分析了其火灾危险性,并提出了防火对策。     

特深内孔洛氏硬度计设计研究

为解决石油泵管(内径φ38～φ100.5)内孔表面硬度,炮管内表面及其它缸体内表面硬度的测量,设计了一种特深孔内表面洛氏硬度计,介绍了该仪器结构原理及测量精度分析.